L865 LED Based White/White MI Strobe

The all LED Dialight D165 Series Medium Intensity White/White Strobe is designed for the lighting of communication towers, smoke stacks wind generators and other obstructions to aerial navigation, as specified by TC and FAA. The L865 Strobe uses LED technology for light output for the White Strobe.

L866/L885 LED Based White/Red Catenary MI Strobe

The Dialight D1RW Catenary White Strobe and Red Beacon is designed to be incorporated into medium intensity L-866 and flashing red obstruction L-885 systems. Applications include the lighting of structures supporting overhead cables above canyons, valleys and waterways as specified by TC and FAA. The Dual L-866/L-885 uses LED technology for light output for both the Red Beacon and White Strobe.

L866 LED Based White/White Catenary MI Strobe

The Dialight D1RW Catenary White/White Strobe is designed to be incorporated into medium intensity L-866. Applications include the lighting of structures supporting overhead cables above canyons, valleys and waterways as specified by TC and FAA. The L-866 uses LED technology for light output for the White Strobe.

L-856 LED Based High Intensity White/Red Strobe

The Dialight D266 High Intensity LED White/Red Strobe is an all LED L-856/L-864 unit designed for the lighting of communication towers, smoke stacks, broadcast towers and other tall obstructions to aerial navigation, as specified by the TC and FAA. A High Intensity system consists of 3 flash heads, 3 power supplies per level and 1 controller for the entire system. The flash heads will be placed on up to six levels of the structure for a maximum of 18 synchronized flash heads for a single tower.

L-856 LED Based High Intensity White/White Strobe

The Dialight D266 High Intensity LED White/White Strobe is an all LED L-856 unit designed for the lighting of communication towers, smoke stacks, broadcast towers and other tall obstructions to aerial navigation, as specified by the TC and FAA. A High Intensity system consists of 3 flash heads, 3 power supplies per level and 1 controller for the entire system. The flash heads will be placed on up to six levels of the structure for a maximum of 18 synchronized flash heads for a single tower.

L-810 Red LED Obstruction Lights

The Dialight RTO Red Standard Series obstruction light utilizes a unique optical, electrical and mechanical design. The RTO series is the most universal, compact and efficient obstruction light in the world. ETL Certified to the FAA requirements, the RTO series fixture is also ICAO and Transport Canada compliant. Also available as a single fixture for direct replacement of incandescent lamp/lens technology. Available in both AC and DC.

L-810 Infrared (IR) LED Obstruction Lights

The Dialight RTO Red Infrared (IR) obstruction light incorporates Infrared LEDs to make the lights more clearly visible to aircraft pilots that utilize Night Vision Goggles during flight. Night Vision Goggles are commonly equipped with filters that are not sensitive to normal LED light. The use of Infrared LEDs in these RTOs along with standard Red LEDs allow for these obstruction lights to be seen clearly with or without Night Vision Goggles.

L-810 Red LED Obstruction Lights

The Dialight 860 series red steady burn obstruction light was the first L-810 LED device to be certified by ETL to the rigorous TC and FAA standards. It is available in a range of voltages from 12 volts to 230 volts and in single or dual configurations.

Red LED Lighting Controller Type A0 (20' - 150')

The LC-A0-LED Obstruction Light Controller is designed to work with L-810 LED Obstruction Lights. The controller is capable of controlling and monitoring up to five LED obstruction lights.

Red LED Lighting Controller Type A1 (151' - 350')

The LC-A1-LED Obstruction Light Controller is designed to work with Dialight LED Beacons and Obstruction Lights. The controller is capable of controlling and monitoring up to two LED L-864 Beacons and five LED L-810 obstruction lights.

Red LED Lighting Controller Type A2 (351' - 500')

The LC-A2 LED Obstruction Light Controller is designed to work with Dialight LED Beacons and Obstruction Lights. The controller is capable of controlling and monitoring three LED L-864 beacons and two levels of five LED L-810 obstruction lights.

White/Red Dual LED Lighting Controller Type E (100’ – 500’)

The LC9-E LED Obstruction Light Controller is designed to work with Dialight White/Red Dual LED beacons and obstruction lights. The controller is capable of controlling and monitoring one L-865/L-864 LED beacon and L-810 LED obstruction lights.

White LED Lighting Controller Type D (100’ – 500’)

The LC9-D LED Obstruction Light Controller is designed to work with Dialight White LED beacons and obstruction lights. The controller is capable of controlling and monitoring one L-865 LED beacon.

Sales: 905-719-6500
Toll Free: 1-844-292-7878

Office: 905-684-3915
Fax: 416-352-7558